§ 3.3.0. PLANS FOR CONSTRUCTION OR MODIFICATION OF POOLS/SPAS

Four copies of plans for the proposed construction or modification of swimming pools and spas subject to this section must be submitted. The following minimum information must be included on the plans and is not to be considered all-inclusive:

□Name and physical address of the facility for which the pool/spa is being built.

□Name of the designer with signature and seal (if applicable).

□A longitudinal layout diagram with all distances marked, including those which show distances from buildings and the size of the pool deck.

□A lengthwise cross-section diagram with specifications, especially those showing depth of the pool at various points. Show depth marker tiles and indicate required signage to be displayed.

□On overhead drawing, including all suction outlets and return inlets, lights, skimmers and vacuum hose connections of the pool using one-quarter (¼″) inch scale.

□Detailed cross-section diagram of enclosure device including dimensions/measurements.

□Volume of the pool in gallons.

□Manner of disposal of backwash, drain water, and sewage from restrooms, when applicable.

□Method of water treatment along with specifications of filter type and media.

□Method of water disinfection.

□Construction materials to be utilized and finished texture for pool interior and decks.

□State recirculation system for complete, continuous circulation including turnover rate and pump specifications.

□Specify the types of drain covers/grates on all suction outlets, including ANSI/ASME A112.19.8-2007 stamp.

□Identify all wall and pool slopes, visual separations, offsetting ledges, benches, lounges, swim-outs, decks, all entry types, including detailed cross section diagram and dimensions/measurements.

□Specify the type of enclosure to be constructed and the required latching mechanism as per the applicable Code(s).