Austin |
Code of Ordinances |
Title 25. LAND DEVELOPMENT. |
Chapter 25-2. ZONING. |
SubChapter C. USE AND DEVELOPMENT REGULATIONS. |
Article 3. ADDITIONAL REQUIREMENTS FOR CERTAIN DISTRICTS. |
SubPart A. General Requirements. |
§ 25-2-582. COMMERCIAL HIGHWAY (CH) DISTRICT REGULATIONS.
(A)
This section applies in a commercial highway (CH) district.
(B)
Except as provided in Subsection (C), the maximum height permitted for a building is:
(1)
60 feet, if the impervious cover on the site is more than 80 percent and not more than 85 percent;
(2)
80 feet, if the impervious cover on the site is more than 75 percent and not more than 80 percent;
(3)
100 feet, if the impervious cover on the site is more than 70 percent and not more than 75 percent;
(4)
110 feet, if the impervious cover on the site is more than 65 percent and not more than 70 percent; and
(5)
120 feet, if the impervious cover on the site is not more than 65 percent.
(C)
The requirements of this subsection apply in a zoning district that combines a CH base district with a PDA combining district. If there is a conflict between the requirements of this subsection and the zoning ordinance establishing the CH-PDA district, the more restrictive requirement governs.
(1)
The minimum lot size is 10 acres.
(2)
The maximum floor to area ratio is 4 to 1.
(3)
The maximum height is 200 feet.
(4)
The minimum front yard setback is 50 feet.
(5)
The minimum street side yard setback is 50 feet.
(6)
The minimum interior side yard setback is 25 feet.
(7)
The maximum building cover is 55 percent of the lot area.
(8)
The maximum impervious cover is 55 percent of the lot area.
Source: Section 13-2-663; Ord. 990225-70; Ord. 031211-11.