§ 3.2. PLANNED UNIT DEVELOPMENT REGULATIONS.

3.2.1.   Uses and Regulations.

The permitted uses, conditional uses, and site development regulations for a planned unit development (PUD) district are established by the ordinance zoning property as a PUD district, the accompanying land use plan, and this section. The council may require development phasing or the construction of off-site infrastructure.

3.2.2.   Residential Uses.

For residential uses, a land use plan must include:

A.

the type and location of each use;

B.

the maximum density;

C.

for multifamily development, the maximum floor to area ratio;

D.

the maximum building height;

E.

the minimum lot size and width; and

F.

other site development regulations that may be required by the council.

3.2.3.   Nonresidential Uses.

For non-residential uses, a land use plan must include:

A.

the type and location of each use;

B.

the maximum floor area ratio, which may not be greater than the maximum floor to area ratio permitted in the most restrictive base zoning district in which proposed use is permitted;

C.

the maximum building height;

D.

the minimum front yard and street side yard setbacks, which must be not less than the greater of:

1.

25 feet for a front yard, and 15 feet for a street side yard; or

2.

those required by Subchapter C, Article 10 ( Compatibility Standards );

E.

the number of curb cuts or driveways, which must be the minimum necessary for adequate access to the site; and

F.

other site development regulations that may be required by the council.

3.2.4.   Industrial Uses.

An industrial use must comply with the performance standards established by Section 25-2-648 ( Planned Development Area (PDA) Performance Standards ).

Source: Ord. 20080618-098.