§ 25-2-556. ADDITIONAL IMPERVIOUS COVER IN SINGLE-FAMILY STANDARD LOT (SF-2) AND FAMILY RESIDENCE (SF-3) DISTRICTS.

(A)

In a single-family standard lot (SF-2) or family residence (SF-3) district, the building official may approve impervious cover of up to 55 percent on a lot after determining that the requirements of this section are satisfied.

(B)

The principal use of the lot must be a residential use.

(C)

The lot must be included in a plat that was recorded before January 2, 1989.

(D)

The lot must adjoin open space, including a golf course or regional park, and the open space:

(1)

must not contain a significant amount of impervious cover;

(2)

must not be likely to be developed with a significant amount of impervious cover;

(3)

must contain at least twice the area of the adjacent lots; and

(4)

must not be separated from the lot by an impervious barrier, including street pavement or a paved plaza.

(E)

A variance from a required building setback on the lot must not have been granted or requested, and the owner of the lot must agree not to request a variance from a required building setback.

(F)

A development intensity transfer affecting the open space must not have been granted.

Source: Sections 13-2-634(b) and 635(d); Ord. 990225-70; Ord. 031211-11.