§ 316S.9. Payment

The work performed and materials furnished as prescribed by this item and measured as provided under "Measurement" will be paid for at the unit bid prices stipulated in the bid for "Polymerized Asphalt Underseal Coat", "Polymerized Asphalt Emulsion", "Polymerized Underseal Coat, Aggregate" or "Polymerized Asphalt Underseal Coat, Complete in Place". The unit bid prices shall include full compensation for: a) furnishing, delivering and placing all materials; b) patching, brooming, compacting and rolling; c) cleaning the existing surface and gutters, covering excess asphaltic material, removal of excess aggregate and cleaning stockpiles sites; d) a 48 hour maintenance period and e) all labor, equipment, tools and incidentals necessary to complete the required work as indicated on the Drawings.

Payment will be made under one of the following:

Pay Item No. 316S-A:	Polymerized Asphalt Underseal Coat, Polymerized Asphalt Emulsion	Per Gallon.
Pay Item No. 316S-B:	Polymerized Asphalt Underseal Coat, Aggregate	Per Cubic Yard.
Pay Item No. 316S-C:	Polymerized Asphalt Underseal Coat, Complete in Place	Per Square Yard.

 

End

SPECIFIC CROSS REFERENCE MATERIALS
Specification Item No. 316S, "Polymerized Asphalt Interlayer Seal"
City of Austin Standard Specifications
Designation	Description
Item No. 232S	Rolling (Pneumatic Tire)
Item No. 301S	Asphalts, Oils and Emulsions
Item No. 302S	Aggregates for Surface Treatments
Item No. 310S	Emulsified Asphalt Treatment
Item No. 312S	Seal Coat
Item No. 313S	Rubber Asphalt Joint and Crack Sealant
Item No. 340S	Hot Mix Asphaltic Concrete Pavement
Texas Department of Transportation: Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges
Designation	Description
Item No. 300	Asphalts, Oils and Emulsions
Item No. 302	Aggregates for Surface Treatments
Item No. 315	Emulsified Asphalt Seal

 

RELATED CROSS REFERENCE MATERIALS
Specification Item No. 316S, "Polymerized Asphalt Interlayer Seal"
Texas Department of Transportation: Manual of Testing Procedures
Designation	Description
Tex-200-F	Sieve Analysis of Fine and Coarse Aggregates
Tex-410-A	Abrasion of Coarse Aggregate Using the Los Angeles Machine
Tex-502-C	Test for Penetration of Bituminous Material
Tex-503-C	Test for Ductility of Bituminous Materials
Tex-504-C	Test for Flash and Fire Points of Petroleum Materials by Cleveland Open Cup
Tex-506-C	Test for Loss on Heating of Oils and Asphaltic Compounds
Tex-507-C	Proportion of Bitumen Soluble in Trichloro-ethylene
Tex-513-C	Test for Saybolt Viscosity
Tex-519-C	Float Test for Bituminous Materials
Tex-520-C	Test for Residue of Specified Penetration
Tex-521-C	Testing Emulsified Asphalts
Tex-528-C	Test for Absolute Viscosity of Asphalt Cements
Tex-529-C	Test for Kinematic Viscosity of Asphalts
City of Austin Standard Contract Documents
Designation	Description
00700	General Conditions
01500	Temporary Facilities
01550	Public Safety and Convenience
City of Austin Standard Specifications
Designation	Description
Item No. 315S	Milling Asphaltic Concrete Paving and Non Portland Cement Concrete Bases
Item No. 320S	Two Course Surface Treatment
Item No. 350S	Heating, Scarifying and Repaving
Item No. 801S	Construction Detours
Item No. 803S	Barricades, Signs and Traffic Handling
Item No. 870S	Work Zone Pavement Markings
Item No. 874S	Eliminating Existing Pavement Markings and Markers
Texas Department of Transportation: Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges
Designation	Description
Item No. 314	Emulsified Asphalt Treatment
Item No. 316	Surface Treatments
Item No. 345	Asphalt Stabilized Base (Plant Mixed)
Item No. 520	Weighing and Measuring Equipment
Texas Department of Transportation: Manual of Testing Procedures
Designation	Description
Tex-509-C	Spot Test of Asphaltic Materials
Tex-510-C	Determining the Effect of Heat and Air on Asphaltic Materials when Exposed in Thin Films
Tex-512-C	Test for Flash Points of Volative Flammable Materials by Tag Open-Cup Apparatus