Austin |
Standard Specifications Manual |
SERIES 300 - STREET SURFACE COURSES |
ITEM NO. 360S - CONCRETE PAVEMENT 9-26-12 |
§ 360S.10. Payment
The work performed and materials furnished as prescribed by this item and measured as provided under "Measurement" will be paid for at the unit price bid for "Concrete Pavement," of the depth indicated on the drawings, "Concrete Pavement (High Early Strength)" of the depth indicated on the drawings and "Monolithic Curb" of the type indicated on the drawings (when pavement is measured by the square yard), as required or adjusted unit price for pavement of deficient thickness as provided under "Deficient Pavement Thickness", which price shall be full compensation for shaping and fine grading the roadbed, including furnishing and applying all water required; for furnishing, loading and unloading, storing, hauling and handling all concrete ingredients, including all freight and royalty involved; for placing and adjusting forms, including supporting material or preparing track grade; for mixing, placing, finishing, sawing, cleaning and sealing joints and curing all concrete; for furnishing and installing all reinforcing steel; for furnishing all materials for sealing joints and placing longitudinal, expansion and weakened plane joints, including all steel dowel caps and load transmission devices required and wire and devices for placing, holding and supporting steel bars, load transmission devices and joint filler material in proper position, for coating steel bars where complete the work.
Excavation required by this item in the preparation of the subgrade and for completion of the parkway will be measured and paid for in accordance with provisions governing the Items of "Street Excavation" and "Borrow," respectively, with provision that yardage to be measured and paid for once only, regardless of manipulations involved. Measurement of subgrade excavation for payment shall be limited to a total width of that of pavement plus 1 foot on each side.
Sprinkling and rolling required for the compaction of the rough subgrade in advance of fine grading will be measured and paid for as indicated in the governing items of excavation. Maintenance of a moist condition of the subgrade in advance of fine grading and concrete placing will not be paid for directly but shall be included in the unit price bid, as provided above.
Payment will be made under one of the following:
Pay Item No. 360S-A: In. Concrete Pavement Per Square Yard. Pay Item No. 360S-AH: In. Concrete Pavement (High Early Strength) Per Square Yard. Pay Item No. 360S-AS: In. Concrete Pavement (High Range Water Reducing Admixture) Per Square Yard. Pay Item No. 360S-B: Monolithic Curb Per Linear Foot. Pay Item No. 360S-C: Concrete Pavement Including Monolithic Curb Per Cubic Yard. End
SPECIFIC CROSS REFERENCE MATERIALS
Standard Specification Item 360S, "Concrete Pavement"
City of Austin Standard Specification Items
Designation Description Item No. 301S Asphalts, Oils and Emulsions Item No. 313S Cleaning and/or Sealing Joints and Cracks (Asphaltic Concrete) Item No. 403S Concrete for Structures Item No. 405S Concrete Admixtures Item No. 410S Concrete Structures Item No. 411S Surface Finishes for Concrete Item No. 413S Cleaning and/or Sealing Joints and Cracks (PCC) American Society for Testing and Materials, ASTM
Designation Description ASTM C 42/C 42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete" ASTM A 82 Specification for Steel Wire, Plain, for Concrete Reinforcement ASTM A 184 Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement ASTM A 185 Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement ASTM A 496 Specification for Steel Wire, Deformed, for Concrete Reinforcement ASTM A 497 Specification for Steel Welded Wire Fabric, Deformed, for Concrete Reinforcement ASTM A 615 Specification for Deformed and Plain Billet-Steel Bars, for Concrete Reinforcement ASTM A 616 Specification Rail-Steel Deformed and Plain Bars for Concrete Reinforcement ASTM C 94 Specification for Ready-Mixed Concrete ASTM C 150 Specification for Portland Cement ASTM C 156 Test Method for Water Retention by Concrete Curing Materials ASTM D 2240 Test Method for Rubber Property-Durameter Hardness ASTM D 882, Method A Test Methods for Tensile Properties of Thin Plastic Sheeting Texas Department of Transportation: Publications
Designation Description Bulletin C-11 Construction Bulletin Texas Department of Transportation: Manual of Testing Procedures
Designation Description TEX-203-F Sand Equivalent Test TEX-401-A Sieve Analysis of Fine and Coarse Aggregate TEX-406-A Mineral Finer than 75 μm (No. 200) Sieve in Mineral Aggregates (Decantation Test for Concrete Aggregates) TEX-408-A Organic Impurities in Fine Aggregate for Concrete TEX-410-A Abrasion of Coarse Aggregate Using The Los Angeles Machine TEX-411-A Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate TEX-413-A Determination of Deleterious Materials in Mineral Aggregate TEX-415-A Slump of Portland Cement Concrete TEX-416-A Air Content of Freshly-Mixed Concrete by the Pressure Method Tex-418-A Compressive Strength of Cylindrical Concrete Tex-424-A Obtaining and Testing Drilled Cores of Concrete Tex-436-A Measurement of Texture Depth by the Sand Patch Method Tex-524-C Testing Premolded Joint Filler for Concrete Tex-612 Acid Insoluble Residue Texas Department of Transportation: Departmental Material Specifications
Designation Description DMS 8900 Fly Ash American Association of State Highway & Transportation Officials, AASHTO Standard
Designation Description Method T 26 Quality of Water to be Used in Concrete RELATED CROSS REFERENCE MATERIALS
Standard Specification Item 360S, "Concrete Pavement"
Texas Department of Transportation: Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges
Designation Description Item 360 Concrete Pavement Item 420 Concrete Structures Item 421 Hydraulic Cement Concrete Item 427 Surface Finishes for Concrete Item 431 Pneumatically Placed Concrete Item 520 Weighing and Measuring Equipment Texas Department of Transportation: Departmental Material Specifications
Designation Description DMS-4650 Hydraulic Cement Concrete Curing Materials and Evaporation Retardants" DMS-6100 Epoxy and Adhesives American Society for Testing and Materials, ASTM
Designation Description ASTM C 685 Concrete Made By Volumetric Batching and Continuous Mixing ASTM C-1260 Standard Test Method for Potential Alkali Reactivity of Aggregates ASTM D-512 Test Methods for Chloride Ion in Water ASTM D-516 Test Methods for Sulfate Ion in Water ASTM D-4191 Test Method for Sodium in Water by Atomic Absorption ASTM D-4192 Test Method for Potassium Water by Atomic Absorption American Concrete Institute, ACI
Designation Description ACI 211.1 Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete Texas Department of Transportation: Manual of Testing Procedures
Designation Description TEX-418-A Compressive Strength of Cylindrical Concrete Specimens