§ 594S.6. Payment

The Gabion and revet mattress quantities, measured as described above, will be paid for at the unit bid prices per cubic yard (cubic meter: 1 cubic meter equals 1.308 cubic yards) of the various types indicated. The price shall include full compensation for furnishing, hauling and placing all materials, including filter fabric, wire containers, connectors, reinforcement stones and backfill; for all labor, tools, equipment and incidentals needed to complete the work.

Excavation and all subgrade preparation required for shaping the foundation for the wire containers shall be included in the unit bid price for "Gabions and Revet Mattresses".

Payment will be made under one of the following:

Pay Item No. 594S-A:	Gabions, Twisted Woven Wire	Per Cubic Yard.
Pay Item No. 594S-B:	Gabions, Welded Wire	Per Cubic Yard.
Pay Item No. 594S-C:	Revet Mattresses, Twisted Woven Wire	Per Cubic Yard.
Pay Item No. 594S-D:	Revet Mattresses, Welded Wire	Per Cubic Yard.

 

End

SPECIFIC CROSS REFERENCE MATERIALS
Specification Item 594S, "GABIONS AND REVET MATTRESSES"
City of Austin Environmental Criteria Manual
Designation	Description
Section 1.4.3.E	Permanent Structural Practices-Gabions
Figure 1.23	Gabions
City of Austin Standard Details
Designation	Description
594S-1	Gabions
594S-2	Gabion Details
American Society for Testing and Materials (ASTM)
Designation	Description
A-974	Standard Specifications for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
A-975	Standard Specifications for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel with Poly Vinyl Chloride (PVC) Coating)

 

RELATED CROSS REFERENCE MATERIALS
Specification Item 594S, "GABIONS AND REVET MATTRESSES"
City of Austin Technical Specifications
Designation	Description
Item No. 101S	Preparing Right of Way
Item No. 102S	Clearing and Grubbing
Item No. 110S	Street Excavation
Item No. 111S	Excavation
Item No. 120S	Channel Excavation
Item No. 130S	Borrow
Item No. 132S	Embankment
Item No. 220S	Sprinkling for Dust Control
Item No. 230S	Rolling (Flat Wheel)
Item No. 232S	Rolling (Pneumatic Tire)
Item No. 234S	Rolling (Tamping)
Item No. 236S	Proof Rolling
Item No. 510	Pipe
Item No. 601S	Salvaging and Placing Topsoil
Item No. 602S	Sodding for Erosion Control
Item No. 604S	Seeding for Erosion Control
Item No. 605S	Soil Retention Blanket
Item No. 606S	Fertilizer
Item No. 607S	Slope Stabilization
Item No. 608S	Planting
City of Austin Standard Details
Designation	Description
642S-1	Silt Fence
Texas Department of Transportation: Manual of Testing Procedures
Designation	Description
410-A	Abrasion of Coarse Aggregate Using The Los Angeles Machine
411-A	Soundness of Aggregate By Use of Sodium Sulfate or Magnesium Sulfate
American Society for Testing and Materials (ASTM)
Designation	Description
A-313	Standard Specification for Stainless Steel Spring Wire
A-370	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A-641	Specification for Zinc Coated (Galvanized) Carbon Steel Wire
A-853	Standard Specification for Steel Wire, Carbon, for General Use
B-117	Test Method of Salt Spray (Fog) Testing
C-535	Standard Test Method for Resistance of Large Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
D-412	Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension
D-638	Test Method for Tensile Properties of Plastics
D-746	Test Methods for Brittleness Temperature of Plastic and Elastomers by Impact
D-792	Test Methods for Specific Gravity (Relative Density) and Density of Plastics by Displacement
D-1203	Standard Test Methods for Volative Loss from Plastics Using Activated Carbon Methods
D-1242	Test Methods for Resistance of Plastics Materials to Abrasion
D-1499	Practice for Operating Light and Water Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics
D-2240	Test Method for Rubber Property-Durometer Hardness
D-2287	Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
G-23	Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Non-metallic Materials